Ultra Tile Proflex S2 Tile Adhesive - White
White UltraTile ProFlex S2 is a single part, flexible, fibre reinforced adhesive for increased bond strength and enhanced performance. Specifically recommended for use with porcelain, natural stone & sparkle quartz stone tiles as the fibre content reduces the amount of moisture present.
It is specially formulated with technology, enhanced adhesion and flexibility, making it ideal for areas where movement or vibration can occur. Classified as S2 in accordance with EN12004 it has the highest level of deformation for exceptional tolerance to movement. UltraTileFix ProFlex S2 contains a unique blend of polymers which provide a superior bonding performance in combination with an extended range of tile types in wet or dry conditions. It is able to take light foot traffic within 4 hours of installation depending upon temperature and substrate.
Ultimate S2 strength and flexibility Proflex S2 is a fast setting adhesive, however owing to the fibre content will give you more time to work than standard fast set adhsive, so very useful if fitting natural stone or larger format porcelain or quartz tiles.
Proflex S2 can adhere to most common building substrates, including concrete/sand render, screeds, brick and block-work, heated sub floors, existing tiled surfaces and screwed and fixed over-boarded wooden floors.
Suitable for interior, exterior, wet and dry conditions.
Key Features
- 20KG Bag
- White
- Average coverage approximately 5 sqm per bag
- Floor & Wall
- Rapid-setting with strength and superior flexibility
- Suitable for underfloor heating
- Internal & external use
- Use with: Natural Stone, Sparkle Quartz Stone, Porcelain, Mosaic, Ceramic, Glass
Surface Preparation: To encourage best adhesion to your substrate it is advised that the area is primed with Proprimer multi surface primer
Further Information: Please refer to the Technical Data Sheet
Pricing | Per Unit |
---|---|
Brand | Ultra Tile |
Colour | White |
Size | 20kg |
Product Coverage | Approximately 5 sqm per bag |
Product Formulation | S2 fibre reinforced with superior strength and flexibility |
Material | Adhesive |
Suitability | Internal, External |
Can be used with | Natural Stone, Porcelain, Mosaic, Sparkle Quartz, Ceramic, Glass |
Technical Data Sheet | Click here to open technical datasheet |
At The Stone and Tile Company Ltd we are committed to offering a fast, reliable, nationwide delivery service. Our Kerbside service will arrive by a third-party courier on a pallet and will be delivered to the nearest accessible location. For orders under 25kg we use a national Parcel Courier service.
All orders must be examined on delivery and any shortages, damages or other discrepancies must be detailed on the delivery note and reported to us within 48 hours. Please check your delivery within 48 hours of receipt and ensure any discrepancies are raised by email or phone during this period.
All pallet orders will be delivered by a 26 tonne tail-lift lorry. If access to the property is restricted then please contact us prior to ordering. All deliveries are kerbside drops. While every effort will be made to deliver your product to the nearest available point, obstructions such as steps, lifts, hills or gravel paths/drives may require the delivery to be made to the nearest possible alternative location. Please advise or discuss any restricted access at the time of ordering.
Goods will not be broken down or discharged by the driver. Please asses the weight of your order as the boxes can be heavy, so we do advise that precautions may need to be made when needing to move the goods from the pallet or crate.